The device has become hot, try to operate in cool condition. In particular if an optical drive is being used as the source device. The computer vibrates to such an extent that the laser can not stay in the track. Check the power supply, the drive might not get enough power. Device error:(264448) Could not write to Disc … Track Following Error Try a different brand of mediums. A known problematic component is GearSec.exe. Medium reading data from medium / Sense key: 3, ASC 2, ASCQ 0 Possibly there are burning programs installed which conflict with CDBurnerXP. Another possible solution is running in SPTD mode (see also: ) POWER CALIBRATION AREA ERROR / Sense key: 3, ASC: 73, ASCQ: 3 All information here: devTrackingServoFailure: could not write to disc If you are burning an ISO image, make sure that it is not corrupted. Some ports may provide insufficient power. “Internal SDK error” / Low quality media error while burning If your drive is connected per USB, try a different USB port (preferably a port located at the back of your computer and no USB hub). CDBurnerXP incorrectly says that the loaded disc is not empty See or If you don't know how to edit the registry, you can also download and start this reg-file.ĬDBurnerXP does not detect the correct disc size If this is the case, you can set the disc size manually by rightclick on the sizemeter (bottom). The key you have to add is HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\.NETFramework\\policy\\v2.0 NET Framework installation correctly In this case you can manually add a registry-key, so that the setup knows (or at least thinks) that. There is a discussion in their support forums. CDBurnerXP keeps accessing the floppy drive periodically Avira Antivir could be a cause of that problem. If that does not help, check Root element is missing (error at startup) Try to delete the file specified in the error message. Knowledgebase Articles KB1: Burning audio discs doesn't work KB2: Error after choosing a compilation type in CDBurnerXP KB11: Error reports with no fix possible KB12: You did not select a burning device KB16: Adding files with portable version does not work Application has generated an exception that could not be handled You can read information on that error in the FAQ The audio file has an invalid format Try updating the Windows Media Player to the latest version. Update your SATA / mainboard drivers if possible. Make sure that the SATA port your device is connected to supports ATAPI devices (check your mainboard's manual) and choose a different port/controller if necessary. To make CDBurnerXP work, please either uninstall/unplug the conflicting application/device or try using the SPTD mode of CDBurnerXP. Currently known is VirtualDrive Pro and MagicJack. Some applications/devices may interfere with drive access. If you have any virtual CD/DVD drives installed, try to disable them temporarily. If no disc is inserted in the drive, try inserting a writable disc. If the drives are also not recognized by your operating system, check The application hangs at startup Try removing all unnecessary USB devices like USB sticks and check if that makes a difference. If necessary, change it.Īnother option is to update the firmware of your drive. Make sure that the drive letter of the drive is between D and Z. CDBurnerXP usually works well with USB drives, so this is a likely cause if your drive is not detected. If you are using an USB drive, make sure that the USB cable is properly plugged in. Otherwise make sure you are using version 4.5 of CDBurnerXP, this version should fix all issues with device detection. In the right pane of Group Policy Editor, change the value of the setting “All Removable Storage: Allow direct access in remote sessions” to “Enabled”. In the left pane of Group Policy Editor, navigate to Computer Configuration → Administrative Templates → System → Removable Storage Access. To prevent this, go to the Start → Run (or Win R) and enter “gpedit.msc”. If the option in setup did not help, you can also try using NeroBurnRights.Īccess to the drives might be blocked in remote terminal sessions. No CD/DVD drive was detected on this system Make sure that you either have administrative rights, or you chose to “provide CD/DVD access to any user” when installing CDBurnerXP.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |